ZZ-2424kft Precision Spot Valve is an enhanced version of pin-type Spot Valve. The larger cylinder enhances the flow rate and pressure value. For some fluidity, not good glue, there are still conditions to use, the pressure value is increased, the force is greater, the fluidity will be improved. For some want to use sealing and precision Spot Valve, to solve this problem.
Operating Viscosity: 1~2,000,000 CPS
Vomiting volume: 0.01ml
Operating pressure: 4-7kg/cm3
Feed pressure: <30kg
Operating frequency: <600min
Feed spout size: 1/8"npt(f)
Rubber outlet bore: 2mm
Flow regulation: micrometer precision fine-tuning device
Point Valve Properties: Top Pin Point Valve
Shape size: (D) 24x (H) 160 (mm)
Control solenoid: 2-way 5-way/2-way 3-way available
Installation screw: M3.5 through screw hole spacing: 17mm
Advantages and features
The width of 1,24mm is larger than that of the ordinary ejector point valve, 3mm, has larger storage capacity, can withstand more air pressure, and improves the glue flow smoothness.
2. Made with precise cmc, it has better sealing. The sealing ring is made of silicone, which has better sealing and anti-corrosion effect.
3. High precision spot valve with precision of 0.01g and minimum gum width of 0.1mm.
4. It can be used with various types of dispensers and is easy to install. It only needs to be locked on the fixture board.
5. The needle is easy to install. Unlike the traditional nut head, the Ruhr connector can screw the needle directly without falling off.
Glue is suitable for use.
Waterborne, metal, sealant, uv, grease, silicone, etc.